Hot Air Circulation Oven

The Industrial Tray Dryer Oven Machine adopts the fan circulation air supply method, and the air circulation is uniform and efficient. The air source is driven by a circulating air supply motor (using a non-contact switch) to drive the wind wheel through the heater, and the hot air is sent out, and then goes through the air duct to the inner room of the oven, and then the used air is sucked into the air duct to become the air source for recirculation. Use heated. Ensure room temperature uniformity. When the temperature value swings due to door opening and closing action, the air supply circulation system quickly returns to the operating state until it reaches the set temperature value.

•The heating source includes steam, electricity, infrared ray, and dual use of steam and electricity.

•Working temperature: steam heating 50-140℃,maximum 150℃.

•Working temperature is 50-500℃ if electricity or infrared ray is adopted.

•Automatic control system and computer control system are available for selection by users.

•Common steam pressure is 0.02-0.8Mpa(0.2-8kg/cm²).

•For electric heating, 15kw if calculated according to I type, actual 5-8kw/h.

•Please indicate any special requirements when placing orders.

•The price of nonstandard ovens is negotiable.

•Please indicate if the working temperature is more than 140℃ or less then 60℃ when placing orders.

•The drying carts and drying discs have uniform dimensions at delivery and are interchangeable.

•Drying disc dimensions: 460*640*45(mm).