Vertical Fluid Bed Dryer Small and Large Scale

Drying time of Vertical Fluid Bed Dryer :

The drying time depends on various factors such as physical properties of material, moisture content, type of moisture ( free or inherent of water or crystallization) drying temperature etc. For example, the crystalline product can be dried faster than amorphous product containing same percentage of moisture at same temperature. Pharmaceutical granules & powder having approximately 20% to 25% moisture can be easily dried. Fluid bed dryers are normally supplied either with electric heating or with steam heating. However hot water/ hot oil circulation system can also be installed.

Principle:

The Fluid Bed Dryer Equipment is composed of the main machine, air handing system, heating system, control system, etc. When it works, the materials enter the silo of the boiling dryer. Set the procedures and parameters according to process requirements and the machine will start working. After filtered by the air handing system and heated by the heating system, the air enters the main machine. After the materials are fluidified and dried by hot air, the moisture is evaporated rapidly and the materials are dried instantly. After the operations are completed according to the set procedures and parameters, the material silo is pushed out and assembled onto the YTZ series fixed lifting material Transferring Machine for lifting discharging. or is pumped to a high position by the vacuum charging machine for granule sizing by the granule sizing machine, so as to effectively control dust pollution and cross contamination. 

Application:

The fluid bed dryer is a process machine widely applied for solid preparation production in the pharmaceutical industry. It has such functions as mixing, drying, etc. It is also widely used in such industries as medicine, chemical industry, food, etc. It has such features as reasonable structure, stable performance, convenient operation, no dead corners, and no exposed bolts. The Drying Machine adopts PLC automatic control. All operations are completed automatically according to the process parameters set by users. All process parameters can be printed and the original records are ture and reliable. It fully meets the requirements for medicine production in GMP.

Technical Parameter: