Description of the Blending Machine for Pharmaceutical Product:
The structure of the Three Dimensional Movement Mixer includes a box body, a motor, a transmission rod, a lower rocker arm, a Mixing Bucket, a rotating rod, an upper rocker arm, bearings, a discharge port, a control panel and a power cord. The new three-dimensional motion mixer passes through the mixing tank The lower rocker arm and the upper rocker arm are installed in the middle. When the motor drives the lower rocker arm to rotate, it drives the mixing bucket to rotate 360 degrees back and forth. While rotating, the upper rocker arm supports and rotates, making the material unloading more thorough, which solves the problem of the existing mixer. Both use horizontal rocker arm to rotate and mix materials, and the material is not completely discharged, which leads to the problem that there is easy residual material in the material cylinder, and the problem of manual knocking on the material cylinder is required to achieve a more thorough effect of material discharge.
Principle:
When it works, the mixer is provided with three-dimensional movement, and carries out revolution and rotation. The Mixing Machine has powerful turbulent action to accelerate material flowing and dispersing and makes turning and translational movement to conquer the impact of centrifugal force, so that gravity segregation and agglomeration will not occur in the materials, there is no dead corner, and even mixing is ensured.
Features:
●The blending machine is provided with three-dimensional movement so that the materials complete the process of mutual mixing from the agglomeration status to dispersion status under the actions of flowing, shearing, translational movement and dispersion, even mixing of materials is ensured and the evenness reaches 99.9%. In ordinary mixers, the materials only make simple dispersion and agglomeration movement in the vessel, which is featured by low efficiency and bad mixing quality.
●With short mixing time and high efficiency, the effective loading rate of the vessel reaches 80%. (The rate of ordinary mixers is only 40%.)
●The Powder Mixer Machine is low and does not have special requirements for plants, so that investment in basic construction is reduced.
●The mixing barrel and machine body driving part can adopt partition installation to meet GMP requirements.
●For the SYH-2 model mixer, mixing vessels of various shapes can be placed in the mixing barrel for mixing with convenient use.
●Stepless speed adjustment can be realized to facilitate material loading and unloading.
●It is featured by long service life and low noise.
●Vacuum feeding and lifting machine feeding are available.
Drawing:
Contact Now
